Saturday, May 3, 2014

The Pendleton Loom

 I've bought a floor loom! You have no idea how excited I am! It's used, of course. It's a Pendleton (see the logo on the right?) but other than that I know next to nothing about it and believe me, I've been googling away.

It folds up, so it's a jack loom, similar to the ones made by the Schact company, except this isn't a Schact. It has a 45 inch front beam, 8 harnesses and 12 treadles. Update: 3/14/15, Happy Pi Day! I've re-measured, in order to start a project. The weaving width is actually 40 inches.



Front
Back
 This has the potential for hours of FUN! Most importantly, I have a warping board, which I didn't have before. A warping board is used to measure out the warp (the "uppy/downy" threads). I think I can maybe get 4(?) yards on this?

There was an odd stick with two screw eyes on one side of it, and evenly spaced holes drilled through the adjacent face...I don't know what it's for. Neither did the lady who sold me the loom. I thought maybe it's for a supplemental warp? It's shorter than the weaving width and one of the screw eyes is wonky. But that stick is the only thing that is messed up on the whole loom.

An 8 harness loom means I can do some interesting patterns. The reason there are more treadles than harnesses is so that you can lift more than one harness (set of threads) at a time when the pattern calls for it.

The weaving bench has storage, and there are a lot of stick shuttles, as well as two boat shuttles and bobbins. There are also extra wire heddles.

The warping board


Weaving bench
What was inside the bench.










Now, all I have to do is shovel out the garage so I can set up the loom!

1 comment:

Unknown said...

Ive been looking at a Pendleton looms online and your post came up . So , did you get your loom up and running?

LaVerne
Pittsburgh Pa